Sarnafil® G 410-48 Feltback EnergySmart
PVC THERMOPLASTIC MEMBRANE
Sarnafil® G 410-48 Feltback EnergySmart Roof Membrane is a PVC thermoplastic membrane produced with an integral fiberglass mat reinforcement for excellent dimensional stability, is highly reflective, with heat‐weldable seams, and a unique lacquer coating applied to the top of the membrane to reduce dirt pick up.
- Highly reflective
- Excellent dimensional stability
- Factory applied lacquer coated to reduce dirt pick up
- Hot‐air welded seams for long‐term performance
- Proven membrane performance
- Superior fire resistance
Usage
Sarnafil® G 410-48 Feltback EnergySmart is used in adhered applications with various adhesives over various substrates.AREAS OF APPLICATION
- New Roofs
- Reroofs
- Recovers
Advantages
- Highly reflective
- Excellent dimensional stability
- Factory applied lacquer coated to reduce dirt pick up
- Hot‐air welded seams for long‐term performance
- Proven membrane performance
- Superior fire resistance
Packaging
1.2 mm (48 mil) Membrane*
3 m x 30 m (10 ft x 100 ft) roll, 165 kg (363 lbs) per roll,
9 rolls per pallet
* Made to order, minimum volume required, extended production lead times. Consult with Sika – Roofing representative for further information.
Colour
- Top: White, Reflective Grey, Tan, and Patina Green
- Bottom: Grey
Product Details
APPROVALS / CERTIFICATES
- FM Global
- Underwriters Laboratories
- Underwriters Laboratories of Canada
- ICC Code Compliance – ESR 1157
- Miami‐Dade County
- Florida Building Code
- NSF/ANSI 347: Platinum Certified
- ENERGY STAR®
- California Title 24
- LEED / Green Globes
- CAN/CGSB-37.54-95. Type 2/Class B
Composition / Manufacturing
High‐quality, PVC membrane containing ultraviolet light stabilizers, flame retardant, and fiberglass reinforcement with a unique lacquer coating on the top surface.
Recycled content
9% Pre‐consumer, 1% Post‐consumer
Reinforcing Material
Fibreglass
Shelf Life
N/A
Storage Conditions
Store rolls on pallets and fully protected from the weather with clean canvas tarpaulins. Unvented polyethylene tarpaulins are not accepted due to the accumulation of moisture beneath the tarpaulin in certain weather conditions that may affect the ease of membrane weldability.
Overall Thickness
| 1.2 mm (48 mil), minimum thickness 1.1 mm (45 mil) | (ASTM D-751) (ASTM Type II D-4434 Spec. Requirement) |
Thickness Above Scrim
| 0.56 mm (22 mil) 0.41 mm (16 mil) | (ASTM D-7635) (ASTM Type II D-4434 Spec. Requirement) |
Felt Weight
305 g/m2 (9 oz/yd2)
Resistance to Static Puncture
| Pass 15 kg (33 lbf) | (ASTM D-5602) (ASTM Type II D-4434 Spec. Requirement) |
Resistance to Dynamic Puncture
| Pass 10 J (7.3 ft-lbf) | (ASTM D-5635) (ASTM Type II D-4434 Spec. Requirement) |
Tensile Strength
| 267 N (60 lbf) 245 N (55 lbf) | (ASTM D-751) (ASTM Type II D-4434 Spec. Requirement) |
Elongation
| 250 & 220% MD & CMD1 250 & 220% MD & CMD1 | (ASTM D-751) (ASTM Type II D-4434 Spec. Requirement) |
1 MD = Machine Direction, CMD = Cross Machine Direction
Linear Dimensional Change
| -0.02% 0.1% | (ASTM D-1204) (ASTM Type II D-4434 Spec. Requirement) |
Tear Strength
| 67 N (15 lbf) 45 N (10 lbf) | (ASTM D-1004) (ASTM Type II D-4434 Spec. Requirement) |
Seam Strength
| Pass 75% of original2 | (ASTM D-751) (ASTM Type II D-4434 Spec. Requirement) |
2 Failure occurs through membrane rupture not seam failure
Low Temperature Flexibility
| Pass Pass -40 °C (-40 °F) | (ASTM D-2136) (ASTM Type II D-4434 Spec. Requirement) |
Retention of Properties after Heat Ageing
| Tensile Strength, % of original: Pass Elongation, % of original: Pass Elongation, % of original: 90 | (ASTM D-3045) (ASTM D-715) (ASTM Type II D-4434 Spec. Requirement) |
Resistance to UV Exposure
| 10,000 hours 5,000 hours | (ASTM G-154) (ASTM Type II D-4434 Spec. Requirement) |
| Cracking (7x magnification) | None |
| Discoloration (by observation) | Negligible |
| Crazing (7x magnification) | None |
Weight Change after Immersion in Water
| 1.9% + 3.0% | (ASTM D-570) (ASTM Type II D-4434 Spec. Requirement) |
Solar Reflectance
| EnergySmart Colors | Initial Solar Reflectance1 | 3-Year Solar Reflectance1 |
| EnergySmart White2 | 0.85 | 0.74 |
| EnergySmart Tan2 | 0.73 | 0.65 |
| EnergySmart Reflective Grey2 | 0.73 | 0.66 |
| EnergySmart Patina Green3 | 0.55 | 0.46 |
1 Solar Reflectance testing according to ASTM C-1549
2 Meets ENERGY STAR®, LEED, Green Globes, and California's Title 24 criteria for Low and Steep Slope applications
3 Meets ENERGY STAR®, LEED, Green Globes, and California's Title 24 criteria for Steep Slope applications
Thermal Emittance
| EnergySmart Colors | Initial Thermal Emittance1 | 3-Year Thermal Emittance1 |
| EnergySmart White2 | 0.86 | 0.84 |
| EnergySmart Tan2 | 0.85 | 0.86 |
| EnergySmart Reflective Grey2 | 0.89 | 0.88 |
| EnergySmart Patina Green3 | 0.86 | 0.85 |
1 Thermal Emittance testing according to ASTM C1371, Slide Method
2 Meets ENERGY STAR®, LEED, Green Globes, and California's Title 24 criteria for Low and Steep Slope applications
3 Meets ENERGY STAR®, LEED, Green Globes, and California's Title 24 criteria for Steep Slope applications
Solar Reflectance Index
| EnergySmart Colors | Initial Solar Reflectance Index1 | 3-Year Solar Reflectance Index1 |
| EnergySmart White2 | 107 | 90 |
| EnergySmart Tan2 | 89 | 78 |
| EnergySmart Reflective Grey2 | 90 | 80 |
| EnergySmart Patina Green3 | 64 | 51 |
1 Solar Reflectance Index calculated according to ASTM E1980.
2 Meets ENERGY STAR®, LEED, Green Globes, and California's Title 24 criteria for Low and Steep Slope applications.
3 Meets ENERGY STAR®, LEED, Green Globes, and California's Title 24 criteria for Steep Slope applications.
Application
APPLICATION
Sarnafil® G 410-48 Feltback EnergySmart is installed after proper preparation of the approved substrate. The membrane is unrolled into Sarnacol® adhesive in accordance with Sika’s technical requirements and then pressed into place with a minimum 45 kg (100 lb) steel roller. Sarnafil® G 410 seams are heat‐welded together by trained operators using hot‐air welding equipment. Different Sarnacol adhesives require different application methods. Please consult Sika’s Specifications or Applicator Handbook for detailed installation procedures.