Water drips falling on a water resistant tile flooring. Black and blue tones with copyspace on the left side. Concept of water leakage and insurance
Silane Water Repellents Products
Sikagard® SN-40 Lo VOC

Sikagard® SN-40 Lo VOC

  • Easy to apply for an economical application.
  • Deep penetration protects it from weathering, ultraviolet rays and abrasion.
  • Reduces water absorption for better protection in splash zones and against driving rain.
  • Reduces chloride ion intrusion and its negative effects through repelling of water.
  • Can be part of corrosion management program to expand service life for reinforced concrete.
  • Not a vapour barrier allowing treated surfaces to “breathe”.
  • Lasts for many years; providing a long-term, cost effective solution.
  • Ministry of Transport Québec acceptance.
  • Approved by Alberta Transportation as a Type 1a and 1b concrete sealer for use on traffic bearing surfaces.
  • Complies with Environment Canada VOC regulations.
  • Product recognized by the British Columbia Ministry of Transportation(BC MoT).
concrete corrosion
Concrete Coatings Products
Sikagard® A-28 Lo-VOC

Sikagard® A-28 Lo-VOC

  • Supplied ready to use, no additions or dilution required.
  • Easy to apply, typically self priming and therefore economical.
  • Excellent weathering performance, resisting ultra violet light, wind erosion and general exposure.
  • Effective barrier to the ingress of water, carbon dioxide, pollutants and chloride ions.
  • Resistant to a wide range of weak acidic and alkaline solutions.
  • Breathable, allowing vapour diffusion in accordance with building physics.
  • Good inter-coat adhesion allows for repair and simple re-coating after cleaning.
  • East to clean and clear ‘wet look’ decorative properties, particularly as long term sealer for stone/concrete or exposed aggregate surfaces, or for low traffic areas such as driveways.
  • Approved by Alberta Transportation as a Type 2a clear coating suitable for use on non-traffic bearing surfaces, such as parapets and curbs.
  • Complies with the VOC legislation.
Sikagard® Color A-50 VOC

Sikagard® Color A-50 VOC

  • VOC compliant; satisfying environmental regulations.
  • Supplied ready to use: no additions or dilution required
  • Easy to apply, typically self priming and therefore economical.
  • Excellent weathering properties; resisting ultra violet light degradation, wind erosion and the effects of exposure.
  • Extremely resistant to the ingress of water, carbon dioxide and atmospheric pollutants.
  • Superior protection against chloride ions providing corrosion management of reinforced structures.
  • Unaffected by weak solvents, such as mineral spirits and napthas.
  • Resists weak alkalis and weak mineral acids.
  • Vapour permeable, allowing buildings to ‘breathe’.
  • Excellent decorative properties, including resistance to fading, chipping and flaking.
  • Ministry of Transport Québec acceptance.
  • Alberta Transportation approved as per Specification B388: Type 3 concrete sealers for non-traffic bearing surfaces.
  • Product qualified by The Road Authority (TRA).