Product Data Sheet Safety Data Sheet Show all documents
Sikaplan® Adhered-60 EnergySmart

Sikaplan® Adhered-60 EnergySmart

THERMOPLASTIC PVC ROOF MEMBRANE

Sikaplan® Adhered-60 EnergySmart is a thermoplastic PVC roof membrane designed with an integral fibreglass mat reinforcement.

     
  • Integral fibreglass mat reinforcement for excellent dimensional stability
  • Heat welded seams for strength and security
Contact
Product Data Sheet Safety Data Sheet Show all documents

Usage

Sikaplan® Adhered-60 EnergySmart is adhered to approved substrates.    Areas of Application
  • Adhered roof systems
  • Adhered roof flashings
  • New construction and reroofing
 

Advantages

     
  • Integral fibreglass mat reinforcement for excellent dimensional stability
  • Heat welded seams for strength and security

Packaging

1.5 mm (60 mil) Membrane

3 m x 30 m (10 ft x 100 ft) roll,158 kg (348 lb) per roll, 8 rolls per pallet
1.5 m x 30 m (5 ft x 100 ft) roll, 79 kg (174 lb) per roll, 12 rolls per pallet

Colour

  • Top: White, Reflective Grey, and Tan
  • Bottom: Dark Grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • FM Global
  • Underwriters Laboratories
  • Underwriters Laboratories of Canada
  • ICC Code Compliance – ES 1157
  • Miami-Dade County
  • Florida Building Code
  • California Title 24
  • LEED / Green Globes
  • CSA-A123.21
 
Product Information

Recycled content

9 % Pre‐consumer, 1 % Post‐consumer

Reinforcing Material

Fibreglass

Shelf Life

Not applicable

Storage Conditions

Store rolls on pallets and fully protected from the weather with clean canvas tarpaulins. Unvented polyethylene tarpaulins are not accepted due to the accumulation of moisture beneath the tarpaulin in certain weather conditions that may affect the ease of membrane weldability.

Overall Thickness

1.5 mm (60 mil) nominal

1.14 mm (45 mil)

(ASTM D751)

(ASTM Type II D4434 Spec. Requirement)

Thickness Above Scrim

0.6 mm (24 mil)

0.4 mm (16 mil)

(-)

(ASTM Type II D4434 Spec. Requirement)
Technical Information

Resistance to Static Puncture

Pass

15 kg (33 lbf)

(ASTM D5602)

(ASTM Type II D4434 Spec. Requirement)

Resistance to Dynamic Puncture

Pass

10 J (7.3 ft-lbf)

(ASTM D5635)

(ASTM Type II D4434 Spec. Requirement)

Tensile Strength

285 N (64 lbf/in)

245 N (55 lbf/in)

(ASTM D751), M.D. 1

(ASTM Type II D4434 Spec. Requirement)

276 N (62 lbf/in)

245 N (55 lbf/in)

(ASTM D751), C.M.D.1

(ASTM Type II D4434 Spec. Requirement)

1 M.D. = Machine Direction, C.M.D. = Cross Machine Direction.

Linear Dimensional Change

-0.02 %

0.1 % max.

(ASTM D1204)

(ASTM Type II D4434 Spec. Requirement)

Tear Strength

67 N (15 lbf)

45 N (10 lbf)

(ASTM D1004)

(ASTM Type II D4434 Spec. Requirement)

Seam Strength

Pass

75 % of original2

(ASTM D751)

(ASTM Type II D4434 Spec. Requirement)

2 Failure occurs through membrane rupture not seam failure.

Low Temperature Flexibility

Pass

Pass

(ASTM D2136), ‐40 °C (‐40 °F)

(ASTM Type II D4434 Spec. Requirement)

Retention of Properties after Heat Ageing

Tensile Strength, % of original: Pass

(ASTM D751)
Elongation, % of original: Pass(ASTM D751)
Tensile Strength, % of original: 90(ASTM Type II D4434 Spec. Requirement)
Elongation, % of original: 90(ASTM Type II D4434 Spec. Requirement)

Resistance to UV Exposure

10,000 hours

5,000 hours

(ASTM G154)

(ASTM Type II D4434 Spec. Requirement)

Cracking (7x magnification)  

None

Discoloration (by observation) 

Negligible

Crazing (7x magnification) 

None

Weight Change after Immersion in Water

2.4 %

± 3.0 %

(ASTM D570)

(ASTM Type II D4434 Spec. Requirement)

Solar Reflectance

EnergySmart Colours

Initial Solar

Reflectance1

3-Year Solar

Reflectance1

EnergySmart

White

0.850.73

EnergySmart

Tan

0.720.652

EnergySmart

Reflective Grey

0.730.652

1 Solar Reflectance testing according to ASTM C1549.

2 CRRC Rapid Ratings: These are interim laboratory‐aged values that simulate weathered values. These values will be replaced with the measured three‐year aged values upon completion of the weathering process. SRI values calculated using Rapid Ratings may change once the aged rating replaces the interim rating.

Thermal Emittance

EnergySmart Colours

Initial Thermal

Emittance1

3-Year Thermal

Emittance1

EnergySmart

White

0.890.89

EnergySmart

Tan

0.890.882

EnergySmart

Reflective Grey

0.890.882

1 Thermal Emittance testing according to ASTM C1371, Slide Method.

2 CRRC Rapid Ratings: These are interim laboratory‐aged values that simulate weathered values. These values will be replaced with the measured three‐year aged values upon completion of the weathering process. SRI values calculated using Rapid Ratings may change once the aged rating replaces the interim rating.

Solar Reflectance Index

EnergySmart Colours

Initial Solar

Reflectance Index

3-Year Solar

Reflectance Index

EnergySmart

White

10790

EnergySmart

Tan

88781

EnergySmart

Reflective Grey

90781

1 CRRC Rapid Ratings: These are interim laboratory‐aged values that simulate weathered values. These values will be replaced with
the measured three‐year aged values upon completion of the weathering process. SRI values calculated using Rapid Ratings may change once the aged rating replaces the interim rating.

Application

Application steps

APPLICATION

Sikaplan® Adhered-60 EnergySmart is installed after proper preparation of the approved substrate. The membrane is unrolled into approved Sikaplan or Sarnacol adhesive in accordance with Sika’s technical requirements and then pressed into place with a minimum 45 kg (100 lb) steel roller. Sikaplan® Adhered-60 EnergySmart seams are heat‐welded together by trained operators using hot‐air welding equipment. Different Sarnacol® adhesives require different application methods. Consult Sika’s Specifications or Applicator Handbook for detailed installation procedures.

 

Documents