Product Data Sheet Show all documents
SikaProof® P-1201 System

SikaProof® P-1201 System

FULLY BONDED, POST‐APPLIED FPO SHEET MEMBRANE WATERPROOFING SYSTEM FOR BASEMENT AND BELOW GROUND STRUCTURES

SikaProof® P-1201 System is a fully bonded composite sheet membrane waterproofing system for reinforced concrete structures. It consists of an embossed flexible polyolefin (FPO) based membrane SikaProof® P-1200 and a 2 component PU adhesive SikaProof® Adhesive-11 (H or V). SikaProof® P-1201 System is cold-applied and post-applied onto the hardened reinforced concrete structure.

  • Fully bonded onto the hardened concrete structure
  • No lateral water underflow between the reinforced concrete structure and the membrane system
  • Highly flexible with crack‐bridging abilities
  • Validated high watertightness
  • Easy to install with fully adhered joints (no welding required)
  • Cold applied
  • Temporarily resistant to weathering and UV‐light during construction
  • Highly durable and resistant to aging
  • Resistant to aggressive elements in natural ground water and soil
  • Can be combined with other approved Sika Waterproofing / Joint Sealing Systems
Contact
Product Data Sheet Show all documents

Usage

SikaProof® P-1201 System may only be used by experienced professionals. Damp‐proofing, waterproofing and concrete protection for basements and other below ground structures against ground water ingress. Suitable for use on:
  • Vertical reinforced concrete walls
  • Horizontal reinforced concrete slabs, protrusions, decks and podiums
  • Extensions and reconstruction works
  • Prefabricated structures
 

Advantages

  • Fully bonded onto the hardened concrete structure
  • No lateral water underflow between the reinforced concrete structure and the membrane system
  • Highly flexible with crack‐bridging abilities
  • Validated high watertightness
  • Easy to install with fully adhered joints (no welding required)
  • Cold applied
  • Temporarily resistant to weathering and UV‐light during construction
  • Highly durable and resistant to aging
  • Resistant to aggressive elements in natural ground water and soil
  • Can be combined with other approved Sika Waterproofing / Joint Sealing Systems

Packaging

Please refer to the individual Product Data Sheet

System Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Function test, Wissbau, according German standards, test report No. 2016-397
  • Radon Diffusion, SikaProof® P-1201, Dr Kemski, Test Report No.2017061601e 
System information

System Structure

SikaProof® P-1201 System

Waterproofing Membrane

SikaProof® P‐1200

Adhesive

SikaProof® Adhesive-11H (Horizontal)

SikaProof® Adhesive-11V (Vertical)

See current Method Statement of the SikaProof® P-1201 System for compatible accessories and complementary products used to create the relevant details and connections.

Shelf Life

Please refer to the individual Product Data Sheet

Storage Conditions

Please refer to the individual Product Data Sheet

 
Technical Information

Resistance to Impact

≥ 400 mm(EN 12691, Method A)

190 lbs (no puncture)

(ASTM E154)

Resistance to Root Penetration

Pass

(CEN/TS 14416)

Pull-Off Strength

≥ 1.5 N/mm2

(EN 1542)

Adhesion in Peel

≥ 80 N/50 mm, to hardened structural concrete(EN 1372)

≥ 30 lbs/in, to hardened structural concrete

(ASTM D903)

Joint Peel Resistance

≥ 50 N/50 mm(EN 12316‐2)

≥ 18 lbs/in

(ASTM D1876)

Accelerated Ageing in Alkaline Environment

Pass

(EN 1847) (28 d / +23 °C)

(EN 1928, Method B) (24 h / 60 kPa)

Resistance to lateral water migration

Pass, up to 7 bar (100 psi)

(ASTM D 5385 modified)

Permeability to Radon

Radon Diffusion, SikaProof® P-1201, Dr Kemski, Test Report No.2017061601e 

Service Temperature

-18 °C (0°F) min. / 35 °C (95°F) max.

Application

Application Information

Substrate Moisture Content

≤ 4 % by weight, as measured with a Tramex moisture meter, no rising moisture

Pot Life

Consult Current TDS for SikaProof® Adhesive-11H or SikaProof® Adhesive-11V for typical Pot Life information
Application consumption

Consumption

Consult Current TDS for SikaProof® Adhesive-11H or SikaProof® Adhesive-11V for typical consumption rates
Application steps

SUBSTRATE QUALITY

Reinforced concrete structure must be:

  • Hardened and of sufficient compressive strength, minimum 25 MPa (3600 psi)
  • With a minimum pull-off strength of 1.5 MPa (215 psi)
  • Dry, sound, clean and free of any contaminations (e.g. dust, oil, grease, release agent, etc.)
  • Free from surface defects (e.g. blowholes, voids, honeycombing, cracks, protrusions, etc.)

SUBSTRATE PREPARATION

The concrete or other suitable cementitious substrate must meet the defined substrate quality. If the substrate does not fulfil the requirements, the surface must be pre-treated prior to the application, in order to prevent any subsequent damage to the membrane sheets.
For more detailed information and guidance please refer to the current Method Statement for the SikaProof® P-1201 System.

Documents